105 The chosen directory does not exist. Would you like the setup to create it?
106 Browse Directory
108 The directory could not be created. You may not have write access.
109 The directory exists, however you do not have write access to this location.
110 The UNC path provided could not be opened because it does not exist.
111 The UNC path provided exists, however either you do not have write access, or you have not logged on properly to this drive.
112 You do not have access to this drive(directory).
113 The drive provided could not be accessed because it does not exist.
2010 Allows you to leave some files on the Network for any of the above setups. You will save disk space, but you will be required to have access to the network each time you wish to run the program.
2011 Allows you to leave some files on the CD-ROM for any of the above setups. You will save disk space, but you will be required to insert the CD-ROM each time you wish to run the program.
2012 The following components have been found your system. The version on your system is newer and they will not be installed.
2013 Select destination drive
2014 Drive
2015 Available space
2016 Required
2017 Dictionaries
2018 You must select at least one Spell Checker language before continuing.
2019 &Accept
2020 &Decline
2021 &Next >
2022 &Cancel
2023 Leave files on &CD (%1)
2024 Select the drive(s) where %1 can make temporary files. Select drive(s) by clicking on the check box.
2025 NOTE: Your current system 'TEMP PATH' will not be modified. This path is for %1 temporary files only.
2026 Temporary Folder(s) Selection
2027 To preview a particular font, expand the font group and double-click on its name.
2028 Click on a font name to see a preview.
2029 You do not have administrator privileges on this machine.\n\nSetup cannot continue.
2030 Please select a folder where you would like to install %1:
2031 You have changed the destination from the suggested folder. It is recommended that you install to the suggested folder. A previous installation was detected there and it could save you some disk space.\n\nWould you like to switch to the default folder?
2032 backup of
2033 Drive type
2034 Removable
2035 Fixed
2036 Remote
2037 CD-ROM
2038 Ramdisk
2039 \COREL.CSW
2040 Please wait while the setup wizard initializes.
2041 Please wait while the setup wizard updates your install information.
2042 Color Profiles
2043 <PN>\RECOVERY.CSW
2045 Recovery
2046 Resume Installation
2047 The previous installation of %1 was interrupted.\nPlease select what you would like to do.
2048 You have previously installed %1. Would you like to install additional components?\nPlease select what you would like to do.
2049 Add additional components
2050 Network Administrator Options
2051 <PN>\NETREC.CSW
2052 <PN>\WSREC.CSW
2053 Select your Shared Windows System Folder.
2054 Workstation Install Options
2055 Please wait while the setup wizard initializes the fonts tree.
2056 Unable to preview this font.
2057 Sorry, the source path does not seem to be a valid path.\nYou may need to map a drive to this network location.
2058 S&ave RSP
2059 Please select a component that you wish to change the destination for and try again.
2060 An invalid destination path was entered at the command prompt.\nPlease enter a valid drive and path.
2061 An invalid source path was entered at the command prompt.\nPlease enter a valid drive and path.
2062 The response file cannot be created.\nPlease check the filename and/or path and try again.
2063 Destination
2064 You cannot use long path name in Short Mode
2065 &Page Down >
2066 The log file cannot be created.\nPlease check the available space and/or path and try again.
2067 RSP File not found :
2068 COMPLIST.CSW
2069 The ShowComp file cannot be created.\nPlease check the filename and/or path and try again.
2070 **Root of drive selected**
2071 You have to enter one or more numbers between 0 to 3 after /Batch
2072 The %1 cannot be created.\nYour drive(%2) is Read only.
2073 The %1 cannot be created.\nPlease check the filename and/or path and try again.
2074 Not enough disk space on drive (%1) to create the %2
2075 Successfully compressed:
2076 Error compressing:
2077 Successfully decompressed:
2078 Error decompressing:
2079 Successfully split:
2080 Error splitting:
2081 Successfully merged:
2082 Error merging:
2083 Installation to floppy complete.
2084 Installation to floppy incomplete.
2085 Installation from floppy complete.
2086 Installation from floppy incomplete.
2087 Welcome to the Floppy Disk Image Creator. The setup will allow you select components you wish to include as part of the floppy setup. It will compress them into image files. These image files will be placed onto your hard drive in separate numbered directories. Simply copy the contents of each directory onto a disk when you are ready to install.
2088 Welcome to the Floppy Disk Installer : from the floppy. The setup will allow you to choose what components you wish to install, depending on what components where installed to the floppy.\n\nClick next to continue.
2089 Disk
2090 .cfi
2091 Please insert the last disk.
2092 Please insert disk %1\n\n
2093 Disk %1 is currently inserted
2094 There is no disk in the drive
2095 An unknown disk has been inserted
2096 Error reading disk
2097 Incorrect Disk
2098 Creating disk
2099 Extracting selected component(s) from
2100 abcdefghijklmnopqrstuvwxyz\nABCDEFGHIJKLMNOPQRSTUVWXYZ\n1234567890 . : , ; ( " * ! ? ' )\nThe quick brown fox jumps over the lazy dog.
2101 The Following Component was not found and will not be installed: %s
2102 -
2103 This program will install components of %1\nto your system.
2104 The Setup Wizard is ready to install %1.\nWhen you are ready to begin, click 'Install'.
2106 UninstallString
2107 S8Uninst.exe
2108 OldString
2110 The response file cannot be created in silent mode.
2111 REGISTER.SEQ
2112 Preload.ini
2113 S8Uninst.csw
2114 StpLnch.exe
2115 Digital Cameras
2116 C&reate Icon
2300 Welcome to the Setup Wizard
2301 Welcome to %1 Setup
2302 User information
2303 Your product serial number
2304 Setup options
2305 Components
2306 Filters
2307 Fonts
2308 Destination folder
2309 Shortcut folder
2310 Ready to install
2311 Welcome to %1 Administrator Setup
2312 Welcome to %1 Workstation Setup
2313 License Agreement
2314 Scanners
2315 Component Destination
2400 &Typical (%1)
2401 &Compact (%1)
2402 C&ustom (currently %1)
2403 Common components
2404 currently
2405 &Leave files on network (currently %1)
2406 &Install files locally (currently %1)
2500 Preparing to copy files
2501 Copying file
2502 Registering file
2503 Creating shortcut
2504 You must accept the license agreement before continuing.\nDo you want to exit the setup?
2505 <none>
2506 Finalizing installation. This may take some time, please wait...
2507 Installation complete
2508 Installing %1
2509 Preparing for setup
2600 Cancel Setup
2601 Setup has not completed.\nDo you want to exit without installing any components?
2602 You are currently in the process of installing components.\nIf you exit now, your components will not be installed correctly.\n\nAre you sure you want to cancel?
2603 Are you sure you want to exit without creating the response file?
2604 Please type in your full name before continuing.
2605 Please type in your company name before continuing.
2606 A directory cannot contain any of the following characters:\n / * ? \ " < > | ,
2608 You may not have enough free space on the destination drive to complete the installation.\nDo you want to proceed anyway?\n\n(It is recommended that you click 'No', and select a different directory.)
2610 You may not have enough free space on your Windows drive to complete the installation.\nDo you want proceed anyway?\n\n(It is recommended that you click 'No', and select a different directory.)
2611 The serial number you have entered is invalid.\nWithout a proper serial number you cannot get access to technical support.\n\nDo you wish to continue anyway?\n(Click 'No' to re-enter your serial number.)
2612 You must have a valid serial number to continue.
2613 Setup could not create the destination directory.\nPlease ensure you have selected a valid path and try again.
2614 A folder cannot contain any of the following characters:\n / : * ? " < > | ,
2615 A folder cannot contain any of the following characters:\n /\:*?"<>|,¥~
2616 Please enter a folder name before continuing.
2618 A required source file was not found:
2619 Could not install file to destination:
2620 You have not selected anything to install.\nPlease go back and select one or more items before continuing.
2621 If you have internet access you can register via our Registration Web Site.\nDo you wish to register now?
2622 The destination you have selected is the root directory of a drive.\nIt is recommended that you choose a subdirectory of a drive.\nDo you wish to install to the root anyway?
2623 The fonts directory you have selected is the root directory of a drive.\nIt is recommended that you choose a subdirectory of a drive.\nDo you wish to install to the root anyway?
2624 I could not create the fonts directory,\nplease ensure you have selected a valid path and try again.
2625 You may not have enough free space on your fonts drive to complete the installation.\nDo you want proceed anyway?\n\n(It is recommended that you click 'No', and select a different directory.)
2626 Some files were installed which require the system to be restarted.\nYou should restart your system before running any of the applications.
2627 Some files were installed which require the system to be restarted.\nWould you like to restart your computer now?\n\n(If you choose to restart, the screen may go blank or flicker.\nPlelee be patient while setup restarts your machine.)
2628 Installing too many fonts can cause Windows to perform slowly. You already have a large number of fonts installed. It is recommended that you uninstall some Windows fonts before continuing.\nDo you wish to ignore this warning and continue?
2629 Installing too many fonts can cause Windows to perform slowly. You have selected fonts that will bring your system total to more than 500 fonts installed. It is recommended that you deselect some fonts before continuing.\nDo you wish to ignore this warning and continue?
2630 Installing too many fonts can cause Windows to perform slowly. The TYPICAL install you have selected includes fonts that will bring your system total to more than 500 fonts installed. It is recommended that you go BACK, and choose a CUSTOM install.\nDo you wish to ignore this warning and continue?
2631 Installing too many fonts can cause Windows to perform slowly. The COMPACT install you have selected includes fonts that will bring your system total to more than 500 fonts installed. It is recommended that you go BACK, and choose a CUSTOM install.\nDo you wish to ignore this warning and continue?
2634 You must choose a default language.
2635 Applications
2636 Filters
2637 Writing Tools
2638 Color Profiles
2639 Fonts
2640 &Help
2641 < &Back
2642 (Installed)
2643 Please select the type of setup that most applies to you.
2644 &Recovery Setup
2645 The setup has detected that the previous installation of this product did not finish. It is recommended that you select this option to complete the unfinished installation.
2646 &Do not recover previous install attempt
2647 Select this option to abort the previously incomplete setup, and start a new one.
2648 &Add New Components
2649 Select this option to add new components to your currently installed <PRODUCT>
2650 &Update Current Installation
2651 Select this option to refresh the files and configurations for your currently installed <PRODUCT>.
2652 Cus&tom Setup
2653 This option allows you select from the available install types and options.
2654 Some files were installed which require the system to be restarted.\nSetup will now restart your computer and continue.
2655 I cannot create the shared directory,\nplease ensure you have selected(entered) a valid path and drive.
2656 The shared directory you have selected is the root directory of a drive.\nIt is recommended that you choose a subdirectory of a drive.\nDo you wish to install to the root anyway?
2657 Digital Cameras
2700 Installation complete!
2701 Installation incomplete
2702 Your installation is complete.\nThank you and enjoy %1.
2703 The setup wizard did not complete the installation successfully. You must rerun this setup program again if you wish to run %1.
2704 A required initialization file was not found:\n
2707 The destination drive you have selected does not support long file names and the product you are installing requires them. Please select another drive to install to.
2906 Sharing violation -- file in use by another user:
2907 Launch and wait success:
2908 Successfully launched:
2909 Shell execute success:
2910 WinExec Success:
2911 Error executing file:
2912 Launch and wait failed:
2913 Launch Failed:
2914 Shell execute failed:
2915 WinExec Failed:
2916 Launch returned 0x01:
2917 Launch returned 0x02:
2918 Launch returned 0x03:
2919 Launch returned 0x04:
2971 Successfully registered Font
2972 Font copied on reboot, successfully not registered
2973 Error registering Font
2974 Binding File
2975 error during bind
2976 Successfully performed Bind on file
2977 Self Registering
2978 Binding File
2979 Successfuly set default string:
2980 Successfully set registry string:
2981 Successfully added key:
2982 Successfully set dword:
2983 Error, Invalid Root Key:
2984 Error, Value is for Root Key only:
2985 Error, Use Root Key only:
2986 Error setting default string:
2987 Error adding key:
2988 Error, default key is not a string:
2989 Error setting DWORD:
2990 Error DWORD is to large:
2991 Source Folder
2992 Destination Folder
2993 Font Folder
2994 Shortcut Folder
2995 Install Locale
2996 Install Sub-Locale
2997 Default Writing Tools Language
2998 This program will install components of <PRODUCT> to your system. \n\n\nClick 'Next' to start the installation.
2999 No Font Directory for Admin Install. Files are copied only.
3000 No shortcuts are created for admin install.
3001 Forced install on reboot:
3002 Are you sure you want to delete the directory (%1) and all its contents permanently?
3003 Delete Confirm
3004 System Locale
3005 System Sub-Locale
3087 Default Language
3088 Setup Option
3089 Typical
3090 Compact
3091 Custom
3092 Yes
3093 No
3094 Residual
3095 OleInitialize Failed:
3096 AUTO-RETRY:
3097 Error loading imagehlp.dll
3098 Fatal Exception:
3099 Shared Folder
3100 The name you entered already exists.Folder cannot be renamed.
3101 Error: (%1) could not be renamed.
3102 Error: Access denied to file:(%1)
3103 Error: Cannot access the file :(%1)\nbecause it is being used by another process.
3104 Error: Access denied to path:(%1)
3105 Error: Cannot access the path :(%1)\nbecause it is being used by another process.
3106 Estimated remaining time : %1 Seconds.
3107 /NoDest should only be used in conjunction with /creatersp.
3108 /Shortonly should only be used in conjunction with /Admin.
3109 No product found to update.
57344 Setup Wizard
57345 Please Select Removable Media Size
57358 KB
57359 MB
57360 Please enter a valid floppy size
57361 Custom Floppy Size
57364 Setup has not created all the files necessary for installing %1 from floppies. You must run floppy creator again if you wish to create all the files necessary for a floppy setup.
57365 File creation incomplete
57366 The Setup Wizard has finished creating all necessary files. You can now copy them to floppies for a future installation of %1.
57367 File Creation Complete
57368 OK
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
